Description
12v Vehicle and Trailer Light Tester TLT2.2
Batter Powered – Rechargeable-Full vehicle and trailer diagnostic unit – Tow Vehicle Light Tester
Battery Powered 12 volt DC Vehicle & Trailer Light Tester 10 Amp Unit
Can Test Single Axle Electric Brakes but not Twin Axle
Vehicle and Trailer Light Test Box – Full Diagnostic Trailer Tester
This Vehicle and Trailer Wiring Tester enables users to test a vehicles trailer plug outlet and a trailers lighting circuit without the need for a car. Identify faults fast.
4 function unit
- Test a cars trailer plug integrity for all 6 circuits
- Test a trailer plug for all 6 circuits integrity
- Self test the unit for unit circuit integrity
- Test trailer leads for correct lead extension wiring
A full all round car and trailer tester
Vehicle Plug Testing Capability
When testing a vehicles trailer plug the stop light includes a speaker beeper for self checking of brake lights via sound. No need for a 2nd person to check your vehicles plug all can be done solo with this tester.
Battery Life
- Regular Light Testing – On a full charge this unit is capable for many multiple hours of continued use with its 2.2amp/hour 12 volt battery. Tested on regular size trailer all lights on at 0.5 amps up to 4 hours of constant use before requiring a charge.
- Testing Single Axle Electric Trailer Brakes – (continuous load applied at 8amps) for a total of 3 minutes before requiring a full charge.
- Testing Twin Axle Electric Trailer Brakes – Not applicable
Fully Portable Unit
Keeping the unit fully charged is highly recommended and is highly recommended after electric brake testing is applied. Fully portable and light. Maximum 14 Amp rated capacity. Monitors the loads for each light so as to check for consistencies among lighting circuits.
External Power Source
- An external 12 volt supply can be applied via the positive and negative terminals on side of unit.
- Alternatively the unit can also supply a 12 volt source to external loads via the positive and negative terminals on side of unit.
Circuit breaker tripping times
- Can hold a load of 11 Amps for 5 minutes
- Can hold a load of 13 Amps for 40 seconds
- Can hold a load of 14.60 Amps for 10 seconds
- Any Short Circuit causes instant trip
Sale Includes
12 VOLT DC Smart Charger
Trailer Tester Box Complete
SPECS
12 VOLTS DC Charger (included)
12 VOLT internal Lead Acid Battery
Protection : 10 Amp Circuit Breaker (10 Amp loads or greater causes Circuit Breaker to Trip unit, Press Circuit Breaker reset to start again)
- Test Vehicle and Test Trailer
- Rated: 12 Volts / 120 Watts / 10amp
- Rechargeable: Charger included
- Battery type: Lead Acid
- Battery Capacity: 2.2 amp/hours
- Red/Black Battery Terminals: 12vots supplied at terminals
- Unit Short Circuit Protection: Load side circuit breaker
- Battery protection: low volts dropout
- Unit Load Rating: 10 amps
- Trailer Plug: Female 7 pin Flat + Male 7 pin Flat
- Switches: 6
- Display: Volts and Amps
- Switched: On/Off
- Dimensions: 220mm x 145mm x 75mm
- Weight: 1500 Grams
- Operating Temperature: 5 degrees – 30 degrees
- Classification: Class 2 Charger
- Manufactured: Australian Made
6 Switch Trailer Light Controller
- Switch 1 – Yellow – Left-hand turn indicator.
-
Switch 2 – Red – Stop lights
- Switch 3 – Blue – Service brakes
-
Switch 4 – Black – Reversing Lights
-
Switch 5 – Brown – Tail lights.
-
Switch 6 – Green – Right hand turn indicator
Example loads for a 5 wire wired trailer with LED lights
- Left-hand turn indicator 0.09 amps
-
Stop lights 0.29 amps
-
Tail lights 0.01 amps
-
Right hand turn indicator 0.09 amps
6 LED Vehicle Trailer Plug Tester
- LED 1 – Yellow – Left-hand turn indicator.
-
LED 2 – Red – Stop lights + audible beeper
-
LED 3 – Blue – Service brakes.
-
LED 4 – Black – Reversing Lights
-
LED 5 – Brown – Tail lights.
-
LED 6 – Green – Right hand turn indicator
Trailer light tester in self testing loop mode
Trailer tester in trailer test mode
(Volts + Amps) Indication
Orders normally ship within 2-3 business days
Reviews
There are no reviews yet.