Description
Vehicle Trailer Light Tester 230v Mains power supplied down to 12volts
230 volt AC to a 12 volt DC Vehicle & Trailer Light Tester 3 Amp unit
Cannot Test Electric Brakes
Vehicle & Trailer Light Tester 230v to 12v
This 230volt supplied Vehicle and Trailer Wiring Tester enables users to test a vehicles trailer plug outlet and a trailers lighting circuit without the need for a car. Identify faults fast.
3 function unit
- Test a cars trailer plug integrity for all 6 circuits
- Test a trailer for all 3 circuits integrity
- Self test the unit for unit circuit integrity
A full all round car and trailer tester
Maximum 3 Amp rated capacity. Monitors the loads for each light so as to check for consistencies among lighting circuits.
Trailer light tester side uses a mains power source to illuminate trailer lighting for wiring, testing, fault finding, etc. Testers vehicles plug uses the vehicles power to illuminate the testers 6 LED’s for checking vehicle trailer plug integrity.
Perfect for the garage or industrial warehouse environment where mains power is easily accessible and where constant charging is not desired.
35 Watt rated useful for constant work where trailer light loads do not exceed 3amps. No charging required.
Vehicle Plug Testing Capability
When testing a vehicles trailer plug the stop light includes a speaker beeper for self checking of brake lights via sound. No need for a 2nd person to check your vehicles brakes testing can be done solo with this tester.
6 Switch Trailer Light Controller
- Switch 1 – Yellow – Left-hand turn indicator.
-
Switch 2 – Red – Stop lights.
- Switch 3 – Blue – Service brakes N/A, 3 AMP MAX
-
Switch 4 – Black – Reversing Lights
-
Switch 5 – Brown – Tail lights.
-
Switch 6 – Green – Right hand turn indicator
6 LED Vehicle Trailer Plug Tester
- LED 1 – Yellow – Left-hand turn indicator.
-
LED 2 – Red – Stop lights + audible beeper
-
LED 3 – Blue – Service brakes.
-
LED 4 – Black – Reversing Lights
-
LED 5 – Brown – Tail lights.
-
LED 6 – Green – Right hand turn indicator
Example loads for a 5 wire wired trailer with LED lights
- Left-hand turn indicator 0.09 amps
-
Stop lights 0.29 amps
-
Tail lights 0.01 amps
-
Right hand turn indicator 0.09 amps
INPUT
230 VOLTS AC – Australian
35 Watts
0.31 AMPS
Protections : 2 Amp fuse ( 2 Amp mains faults or greater causes fuse to trip unit, replace fuse to start again )
OUTPUT
12 VOLTS DC 7 Pin Flat Trailer Plug + Male 7 pin Flat
35 Watts
3 AMPS
Protections : Short, Overload and Over Voltage
- Dimensions: 170mm x 120mm x 80mm
- Weight: 820 Grams
- Operating Temperature: 5 degrees – 30 degrees
- Classification: Class 1
- Australian Manufactured.
Test Trailers and test the car trailers plug integrity
240 volt supply as the Input
Voltage and amperage loads indicated for each light or across total
Orders normally ship within 2-3 business days
Reviews
There are no reviews yet.